The HEKA Congo incubator is ideal for incubating raptor eggs or other difficult to breed bird/poultry eggs.
The casing is made from synthetic material for easy cleaning. Temperature, humidity, egg turning intervals, cooling off time and cooling periods are regulated by our reliable computer control system. The menu and computer controls are extremely user-friendly. All desired settings are easily set by simple key press and displayed in large illuminated letters. Temperature and humidity are displayed simultaneously.
Capacity Raptor 65 Parrot 130
Fully automatic egg turning
Behind the incubator, there is a turning-motor (exterior, covered), which is connected with the trays by a push-rod and white connectors (powder-coated aluminium). The motor pushes and pulls the trays automatically forwards and backwards. For best success in brooding, all our incubators do 12 turnings per day.
Low vibration balanced axial fan
Vibration of the hatching eggs is prevented by this axial fan.
The incubator is equipped with a fully-automatic humidification system. It includes a water- canister, which is the water reservoir for the humidification. A float valve regulates the water supply from the canister to a water container with a heater. Every time while heating (continuously at heating up and in short impulses when set-temperature is reached), the water- heater is activated, which heats the water and evaporates it.This is a failure-free and reliable technique for best success in brooding. It's also possible to connect the incubator directly to your water line. If you request this, we then adjust your machine for this higher water pressure.
Processor-controls with complete regulation by computer
The reliable computer-controls feature a high- class functional range. Temperature and humidity are shown so that you can check the precise regulation of your incubator at any time. On the other hand, temperature, humidity, turning and cooling can be programmed with just a few key presses.
The insulation value is much better in comparison with single glazing, and uses less energy.
Includes two thermostats for ultra-reliability when incubating high value eggs.
The incubator is completely equipped with all the accessories that are needed. Included is an interior light, easily removable filter for fluff, dust and feathers, one egg tray and one hatching tray of your choice, a water canister and a detailed manual.
The incubator comes supplied with a water tank that can be placed on the top of the incubator. Alternatively it can be directly connected to the mains water supply at no extra cost.
WEIGHT 35 kg WIDTH 50 cm HEIGHT 55 cm DEPTH 50 cm POWER CONSUMPTION IN 24H 0.5 kWh
- Parrot Egg Incubator
- Parrot Egg Hatcher
- Raptor Egg Incubator
- Raptor Egg Hatcher
- Additional Information
Guarantee 2 Years Unpacked Product Weight (kg) 35 Width (cm) 50 Height (cm) 55 Depth (cm) 50