This is a very tough, heavy duty drinker, which can be connected to a water supply pipe or a hose pipe if you want to be able to move it around.
It has fixing holes in the back to allow you to bolt it to a wall or post.
It can also be just placed on the ground for small livestock, such as chickens or ducks.
The top screws on so it will not get lost, blown off or dislodged by livestock. The valve construction does not get damaged by frost.
We use them for our ducks on the farm, standing them on a bed of pebbles to reduce mud and connected direct to a flexible mains (hose) pipe so we can clean them out more easily.
Heavy gauge steel, galvanised after manufacture so it will last a very long time.
Finished with no sharp edges or corners to protect your animals.
Fitted with BS1212/PT2 Mains Pressure Ball Valve as standard.
It has a 1/2" BSP (half inch British Standard Pipe) thread on the water inlet, allowing you to attach a range of connectors depending on the kind of pipe that you are using. We recommend that you use Plasson pipe fittings if you are connecting direct to 20mm blue polypipe, as these are good quality and will not leak. If you are connecting to a flexible hose you will need a brass 1/2" BSP to Hose Pipe connector, available from most plumbing or agricultural stores.
Height 200 mm
Width 430 mm
Depth 370 mm
Capacity 14 litres
Spare parts are readily available, just contact us for these.
- Additional Information
Guarantee No Unpacked Product Weight (kg) 10.5 Width (cm) 43 Height (cm) 20 Depth (cm) 37